Hmm, det verkar som om varan är såld
View this ad in the archiveABI ABI VDW 3525 double rotary head drill drilling rig dual auger cfa ccfa dsm fdp
75 000EUR
Pris inkl. moms
- ≈ 864 540 SEK
- ≈ 81 066 USD
2003 Tamrock CMD120R - Borrigg
Power 4000 SCD
75 000EUR
- ≈ 864 540 SEK
- ≈ 81 066 USD
Hütte HG 24 rotary head
Sandvik Commando DC125R
68 000EUR
- ≈ 783 849 SEK
- ≈ 73 499 USD
Eurodrill RHV 2400 vibration rotary head
Atlas Copco FlexiROC T40R
135 000EUR
- ≈ 1 556 172 SEK
- ≈ 145 918 USD
Vermeer NAVIGATOR D80X120
Prime Drilling PD400/120RP
2012 GROUND HOG HD99H 17125
Borrmaskin YGSL-120R Dual-top drive power head
Publicerad: 1år. 2mån.
Publicerad: 1år. 2mån.
50 000EUR
Pris exkl. moms
- ≈ 576 360 SEK
- ≈ 54 044 USD
5 Maj 2023
Do you want to know prices for the similar offers?
Öppna katalogenDen här annonsen har flyttats från vår databas. Istället kan du beställa: YGSL-120R Dual-top drive power head
Placera en önskad annonsDual-top drive power head Drilling machine YGSL-120R Track-Type
It is sold together with a trawl for transportation on the base of a Volvo FL6 car, along with 30 rods with a diameter of 89 mm and a length of 3 meters.
The drill worked out 172 motorcycle hours.
Specification
Drilling depth (m)
150 ~ 80
Drilling diameter (mm)
Ф100 ~ 195
drill power head output speed (positive and negative) (rpm)
5 ~ 35 (low); 5 to 70 (high)
power head drill maximum output torque (Nm)
6000
Casing power head output speed (positive and negative) (rpm)
10
Casing head maximum output torque (Nm)
12000
power head to carry out the process (mm)
3500
power head maximum pull force (kN)
55
Power Head biggest feeding force (kN)
35
mast slip stroke (mm)
850
mast swing angle (°)
left 90, right 20; or left 20, right 90
orifice holder hole diameter (mm)
200
on the car slewing angle (°)
left 30, right 90; or right 30 and left 90
gradeability (°)
20
walking speed (kM / h)
1.2
power machine power (kW) (Diesel)
125
rig outside dimensions (transport status) (mm)
about 7650x2250x3217
Rig mass (kg)
about 8500
Optional parts
a) 1.1 ton hydraulic winch
b) mud pump
c) wet dust removal device
d) wired remote control device to walk
e) safety emergency stop button
The Drilling Rig Model YGSL-120R, which is a full hydraulic top drive double power head crawler drilling rig, can be applied for different kinds of drilling technique methods and a variety of ground conditions. Especially in the difficult work condition, such as the incompact ground area, the gravel place, and the fragment rock stratum, this drilling can always provide the operator excellent solutions.YGSL-120R Drilling Rig has already been widely used in boring not only the GSHPs hole and water well or water exploration hole; but also the drain hole and large tonnage prestressed anchoring hole of the geotechnical engineering, such as boreholes on side slopes of dams, railways, highways, etc.; pipe sheds drilling of the underground engineering; the grouting reinforcing hole drilling; the small foundation pile boreholes; and the drilling holes of landslide preventing and the treatment engineering of rock collapse.
Features
● Drilling Rig is installed the front and the rear power heads, which makes a variety of drilling methods possible. For example: single rotating drilling for inner or outer drilling tools itself; inner drilling tools rotating drilling, but the outer casing pipes reversing drilling; etc.
● There are two levels (high speed or low speed) of rotary speed output. The rotary speed can be stepless adjusted in rating speed range of each level in order to be suitable for a variety of boring methods and techniques, such as rotary drilling, impact boring (Down-the-hole Hammer drilling), impact and rotary drilling, auger drilling and so on.
● Drilling Rig has large rotational torque and long feeding stroke that make the borehole faster. Moreover, the accident treatment capability and the borehole efficiency are able to be enhanced.
● The structure of the drilling rig is mounted on the whole crawler track chassis. Machine moving, hole position directing can be more convenient and faster that saves more assistant time of moving from one hole to another hole positions when drilling in one work area.
● The hydraulic pumps, motors and operating valves are all selected from international famous products. Thus, the performance of the machine will be stable, creditable and long life.
● Drilling Rig involves the hydraulic wrenching and clamping device (CLAMP), which makes clamping and loosening drilling tools’ connection easier, more convenient and dependable, and enormously reduces the assistant work of the operators during the drill work.The whole structure adopts modular design. The Lineate Remote Moving Control Device and Safety Emergency Stop Switch can be installed as customer’s requests.
50 000EUR
Pris exkl. moms
- ≈ 576 360 SEK
- ≈ 54 044 USD
5 Maj 2023
Do you want to know prices for the similar offers?
Öppna katalogenDen här annonsen har flyttats från vår databas. Istället kan du beställa: YGSL-120R Dual-top drive power head
Placera en önskad annons